Fireplace mantel

A Fireplace with a swinging crane is more popular as you can easily handle the kettle or any other utensils that are hung over the crane. If you look at any of the fireplace now most of them would have a swinging crane in them. Pots can be hung over it.

The length of the pot hook might vary according to your needs. If the pot hook is longer then the pot would be near the flame and the heat would be more. If the pot hook is shorter the flame near the pot would be less. This is more helpful in different types of cooking.

Cutting fireplace mantel

Cutting a fireplace mantel is left to the imagination of the person who is creating it. Each and every fireplace would be different. You have to create a working plan before you start up the project.

Different tools and material are required for cutting and creating a fireplace mantel. Some of the tools that are required by you are: Pry bars, safety goggles, wide putty knife, table saw, nail gun (pneumatic), level, pencil, brad nailer (pneumatic), disposable gloves, stud finder, and a power miter box.

The materials that are needed for cutting a fireplace mantel are nails, wood glue, plinth blocks, brads, decorative molding, wood adhesive, construction adhesive, decorative trim, spackling compound (interior grade), paint, and primer.

The material and the tools required for creating and cutting a fireplace mantel might vary upon the design and the plan you have for the project.

The first step in cutting fireplace mantel is to remove the molding if any that exists already. You could use a pry bar with a putty knife to do this. Make sure that you are not damaging the wall in this process.

<< First < Previous [7 / 7] Next > Last >>